Puig Racing Screen Yamaha Fazer 06-16 C/Blue
Give your bike the competitive character you've always looked for with the Puig Racing screen._x000D_
Manufactured in 3mm high impact acrylic, resistant and long-lasting material rounded to> 2mm (complying with German T'V regulations), thanks to its double height, the effect of air hitting on the helmet will be greatly reduced. This screen is available in two models: Z-Racing and R-Racer, depending on the model._x000D_
_x000D_
The design of the Z-Racing screen has been tested in the wind tunnel, improving the aerodynamic coefficient and the protection against wind gusts by 12.7% (upright position) with respect to the original model and by 61% in racing position._x000D_
_x000D_
On the other hand, the R-Racer screens, apart from being studied in the wind tunnel, are developed together with racing teams from the SBK World Championship and Endurance, achieving a perfect balance between protection and aerodynamics._x000D_
The assembly of the piece does not require modifications and is accompanied by an exhaustive aerodynamic study._x000D_
_x000D_
Check if the part number is homologated by the German KBA and if it is already included in the homologation in the DOCUMENTS section._x000D_
Les merShow less
Manufactured in 3mm high impact acrylic, resistant and long-lasting material rounded to> 2mm (complying with German T'V regulations), thanks to its double height, the effect of air hitting on the helmet will be greatly reduced. This screen is available in two models: Z-Racing and R-Racer, depending on the model._x000D_
_x000D_
The design of the Z-Racing screen has been tested in the wind tunnel, improving the aerodynamic coefficient and the protection against wind gusts by 12.7% (upright position) with respect to the original model and by 61% in racing position._x000D_
_x000D_
On the other hand, the R-Racer screens, apart from being studied in the wind tunnel, are developed together with racing teams from the SBK World Championship and Endurance, achieving a perfect balance between protection and aerodynamics._x000D_
The assembly of the piece does not require modifications and is accompanied by an exhaustive aerodynamic study._x000D_
_x000D_
Check if the part number is homologated by the German KBA and if it is already included in the homologation in the DOCUMENTS section._x000D_
Kompatibel med:
| Merke | Modell | Fra år | Til år |
|---|---|---|---|
| YAMAHA | FZ1S FAZER | 2006 | 2016 |
Sist vist
Referanse: FA231HH-44474
kr 443.00
Sintered HH Pad Set or Grooved Shoe - Bak Bremseklosser/BremseSko (1 ) ett sett for en caliper. Har du (2) to caliper må du bestille (2) to sett
![Fox Body: (T) [Ø 1.834 Bore, Ø1.010 Eyelet Bore, 6.700 Bore Depth, 8.597 TLG] Ho](https://www.motoparts.no/158043-home_default/foxbodyt1834bore1010eyeletbore6700boredepth8597tlgho.jpg)
Referanse: 972-207-44-067-1
kr 2,280.00
Referanse: 452-742-024
kr 3,330.00
Referanse: 27-1-512-16
kr 181.70
kr 197.50
Supersprox - Front sprockets. Made from SCM-435 steel to ensure a long life. Ultra hard surface layer reduces friction to prevent power loss caused by chaindrag. Fully lightened with radial holes for off road and...
16 andre produkter i samme kategori:
Referanse: 33-0840W
kr 1,600.00
If you are looking to protect yourself and the motorcycle against possible inclement weather and from the cold, the Puig Custom I windshield is the ideal option. Manufactured in high-impact acrylic, material that...
