Hjem
>
Snøscooter
>
Deler og utstyr
>
Dempere
>
Spareparts and oils
>
Fox Valve: Metric [20,0mm OD X 8,0mm ID X 0,15mm TH]

Fox Valve: Metric [20,0mm OD X 8,0mm ID X 0,15mm TH]

Fox Valve: Metric [22,0mm OD X 8,0mm ID X 0,15mm TH]

Fox Valve: Metric [18,0mm OD X 8,0mm ID X 0,15mm TH]

Les merShow less

kr 55.00

Beregn lengre leveringstid

Bestillingsvare

Referanse:

972-045-15-820

Produktdetaljer

Produktdetaljer

Referanse 972-045-15-820

Sist vist

Fox Valve: Metric [20,0mm OD X 8,0mm ID X 0,15mm TH]

Vis mer

Del

Fox Valve: Metric [20,0mm OD X 8,0mm ID X 0,15mm TH]

Referanse: 972-045-15-820

kr 55.00

Kjøp

Del

"K&N Universal Clamp-On Filter Oval Flg, 6-1/2"" X 4-3/4""B, 4-1/2"" X 3-1/4""T, 7-1/"

-5%

Vis mer

Del

Tidsbegrenset tilbud

"K&N Universal Clamp-On Filter Oval Flg, 6-1/2"" X 4-3/4""B, 4-1/2"" X 3-1/4""T, 7-1/"

Referanse: 20-RU5063

kr 1,097.25 kr 1,155.00

Kjøp

Del

Fox Spring: 8.000 TLG X 2.250 ID X 425 lbs/in Silver

Vis mer

Del

Fox Spring: 8.000 TLG X 2.250 ID X 425 lbs/in Silver

Referanse: 972-039-18-109

kr 5,650.00

Kjøp

Del

16 andre produkter i samme kategori:

Lukk

Trykk for flere produkter.

No products were found.

Fox Valve: Metric [20,0mm OD X 8,0mm ID X 0,15mm TH]

Fox Valve: Metric [20,0mm OD X 8,0mm ID X 0,15mm TH]

"K&N Universal Clamp-On Filter Oval Flg, 6-1/2"" X 4-3/4""B, 4-1/2"" X 3-1/4""T, 7-1/"

Fox Spring: 8.000 TLG X 2.250 ID X 425 lbs/in Silver

Fox Shaft: (T) [0,187 ID X 0,620 OD X 9,450 TLG] Steel, Chrome, w/ Cross Hole

Fox Body: (T) [Ø 1.834 Bore, 12.425 TLG] Steel, Body Cap ID Thread, Wire Ring En

Fox Spring: (T) [9.000 TLG X 2.250 ID X 250 lbs/in] Silver

Fox Body: (T) [Ø 1.834 Bore, Ø 0.9995 Eyelet Bore, 7.052 TLG] Acme OD, w/ Groove

Fox Decal: Big Moto, Podium X, RC3 [6,8 X 2,5]

Fox Piston: (T) Damping [Ø1.834 Bore, Ø .055 bleed, Ø 0.502 ID, 4 Port] High Flo

Fox Shaft: Axle Cap, 40_36, LH Thread, Black Ano, Type II, Class 2

Fox Body: (T) [Ø 1.834 Bore, 2.50 x 1.300 x 10.300 TLG] Al 6061, Clear Ano III,

Fox Decal: Base Valve, 3 Position Mode Control

Fox Damping Adjust Part: (T) Metering Rod [0,175 OD, 40° taper, 13,000 TLG] RD

Fox Decal: 2013 Air Sleeve [5.34 X 2.5] Factory Series

Fox Body: (T) [Ø 1,459 Bore, 3,700 TLG, 1,600 THDL] AL 6061, Clear Ano

Fox Spacer: (T) Shaft [0.880 ID X 1.750 OD X 1.500 TLG] 6061-T6, Rebound Adjust

Fox Shaft: (T) [Ø ,620 OD, Ø,188 ID, 11,300 TLG] Steel, Chrome, 1,400 Post Len

Fox Hose: [-5, 1/8-27 MNPT X 1/8-27 MNPT, 12,000 TLG]

Fox Fastener, Standard: Screw [1/4-20 X 1,500 TLG] Alloy SHCS, Zinc

Søk

Meny

Innstillinger