wall mount.blower 24V 5Amp

IP44 watertight permanent magnet motor in compliance with ISO8846 standards. For continuous cooling in engine rooms. White ABS body.
24V / 5A
Flow 750 m3/h
A = 150mm
B1 = 110mm
B = 103mm
C = 119mm
D = 135mm
E = 281mm
F = 257mm
G = 147mm
H = 150mm" "79073
Les merShow less
kr 3,310.00
Beregn lengre leveringstid
Bestillingsvare
Referanse:
M16-106-06
Produktdetaljer
M16-106-06
Sist vist
Referanse: M16-106-06
kr 3,310.00
IP44 watertight permanent magnet motor in compliance with ISO8846 standards. For continuous cooling in engine rooms. White ABS body. 24V / 5A Flow 750 m3/h A = 150mm B1 = 110mm B = 103mm C = 119mm D = 135mm E = 281mm...
Referanse: 101-3-0199
kr 1,297.50
Dramatically reduce cavitation and prop spin with our easy to install Pump Seal Kits. Location specific, molded inserts fill the voids in pump inlet shoe that bleed air into pump causing cavitation. Recommended for...
Referanse: M18-001-30
kr 3,915.00
Made of flexible PVC, non-toxic, fitted with reinforced polyester thread; ideal forwater distribution or for bilge pumps." "79571
16 andre produkter i samme kategori:
Referanse: M52-194-34
kr 5,933.75
Assembled polyethylene tank with fresh water pump M16-512-12 (12V).Recommended for 1/3 taps. Inlet joint 1 1/2? - Vent 3/4?Water tank with pump 12V 117lCapacity: 12,8l/min 12v" "80721
Referanse: M16-525-24
kr 1,760.00
Self-priming bilge pump. It can run dry without damage. Also ideal as drain pump for grey water tanks. Strainer + 4 fittings (2x1/2? threads + 2x14mm with 1/2? hose adaptor)CE certified24V 5,6A17l/minSize:...
Referanse: M16-104-35
kr 1,586.25
Self-extinguishing extractor hose 80 mm Heat-resistant up to 130?, self-extinguishing, very flexible, made onpurpose for engine room ventilation.?80mmFits: M16-104-20/21" "79065
Lukk
Trykk for flere produkter.
No products were found.

Meny

Innstillinger

Trykk for flere produkter.
No products were found.