Sist vist
Referanse: 33-6484H
kr 1,730.00
183535
Referanse: M38-175-10
kr 757.50
Locks the butterfly nut: 1) So the engine cannot plunge into the water; 2) prevents the outboard engine from been stolen, as it the Secure Lock must be broken. Made of anodized aluminium pipe thickness 4 mm...
Referanse: 201-15-0911
kr 328.94
kr 346.25
16 andre produkter i samme kategori:
Referanse: M16-122-30
kr 1,240.00
Automatic bilge pump.The pump activates when the bilge water level is 7 cm and stops when water hasbeen totally drained. CE certified by RINA in compliance with Law 94/25, directive ISO 28846/28849Model A-150012V...
Referanse: 106-01-03-011
kr 1,275.00
Submersible heavy duty bilge pump 12V with pump capacity 110 L/min (1750 GPH) and 85 L/min (1350 GPH) at 1m head. Stainless steel shaft, double ball bearings, mechanical seal, tough thermoplastic ABS housing and a...
Referanse: M16-124-03
kr 682.50
Automatic bilge pump. Very compact, with built-in electronic level sensor. ABS body, stainless steel shaft. Reduced current draw. Removable from plug-in base.CE certified by RINA in compliance with Law 94/25,...
Referanse: M16-122-33
kr 1,388.75
Automatic bilge pump. The pump activates when the bilge water level is 7 cm and stops when water has been totally drained.CE certified by RINA in compliance with Law 94/25, directive ISO 28846/28849Model A-200024V...
Referanse: 106-01-91-065
kr 428.75
Vertical mounted bilge strainer with non-return valve.Maintains water in the suction line for easy prime. Prevent bilge debris blocking the pump or inlet suction line.Easy to maintain and clean."
"348800
Referanse: 106-01-02-006
kr 648.75
Submersible bilge pump 24V with pump capacity 75 L/min (1100 GPH) and 65 L/min (1000 GPH) at 0,9m (3ft) head. Stainless steel shaft, compact and easy to install.Tough thermoplastic ABS housing with detachable...
Referanse: 106-01-66-027
kr 670.00
Three- positions switch bilge pump control panel 12/24V. Manual, automatic and off.The automatic feature operates in combination with automatic bilge level switches or automatic bilge pumps.Integrated fuse holder,...
Referanse: 106-01-91-047
kr 290.00
By-Pass connection for manual bilge pump PN 01-01-001, or bulk packed PN?s 01-31-045/ 01-31-046.It allows for connecting both the manual pump with an electric submersible bilge pump* in- line using the same hose and...
Referanse: M16-123-02
kr 855.00
Automatic bilge pump. Permanent-magnet motor, stainless steel shaft, watertight sealing electrical cables. It can be run in automatic or manual mode. Removable from plug-in base.CE certified in compliance with...
Lukk
Trykk for flere produkter.
No products were found.