CFR Brett Turcotte Signature Handlebar, Red

CFR Brett Turcotte Signature Handlebar, Red

The Brett Turcotte Signature Bar is an oversized handlebar, measuring 1 1/8 at the clamping area.
-½ rise
-28.5 width
-5° upward bend
-10° sweep
-SDG Grips
-Made from 7075 heat-treated aluminum
-Available in 5 colorways; Black, White, Teal, Purple and Red.
-Bar Pads not included.

Les merShow less
kr 1,935.00
På lager
Referanse:
928-1077-02
Beskrivelse

The Brett Turcotte Signature Bar is an oversized handlebar, measuring 1 1/8 at the clamping area. Verifying fit is your responsibility.

An OVERSIZE ADAPTER , KNUCKS 2.0 RISER or FTP Riser may be needed depending on the riser you currently have.

Les merShow less
Produktdetaljer
928-1077-02
Sist vist
Referanse: 928-1077-02
kr 1,935.00
The Brett Turcotte Signature Bar is an oversized handlebar, measuring 1 1/8 at the clamping area.-½ rise-28.5 width-5° upward bend-10° sweep-SDG Grips-Made from 7075 heat-treated aluminum-Available in 5 colorways;...
16 andre produkter i samme kategori:
Referanse: 928-1056-1
kr 1,935.00
- 1 1/8” clamp diameter (requires oversized bar mounts)- 8° upward rise, 12° pull-back sweep in all rises- Available in 1\, 2\ and 3\ rises.- Constructed from 7075 aerospace aluminum- Anodized black finish for...
Referanse: 928-1059-07
kr 1,855.00
Product Specs7/8 diameter at the clamp (works on most stock risers)SDG (smaller diameter grip)1 rise7 degree upward bend12 degree pull back40 degree downward bend j-hooks29 widthQR technology (quick rise)Made from...
Referanse: 928-1004-06
kr 1,855.00
7/8 standard diameter clamping area30 width1? rise4.5? up sweep14? pull back10? forward bend with 37? pull back on the J-bends" "188168
Referanse: 928-1055-3
kr 1,935.00
- 1 1/8” clamp diameter (requires oversized bar mounts)- 8° upward rise, 12° pull-back sweep in all rises- Available in 1\, 2\ and 3\ rises.- Constructed from 7075 aerospace aluminum- Anodized black finish for...
Referanse: 928-1077-07
kr 1,935.00
The Brett Turcotte Signature Bar is an oversized handlebar, measuring 1 1/8 at the clamping area.-½ rise-28.5 width-5° upward bend-10° sweep-SDG Grips-Made from 7075 heat-treated aluminum-Available in 5 colorways;...
Lukk
Trykk for flere produkter.
No products were found.

Meny

Innstillinger

Trykk for flere produkter.
No products were found.